page_banner

Factory wholesale Recycled Kraft Paper Making Machine - Fluting&Testliner Paper Production Line Cylinder Mould Type – Dingchen

Factory wholesale Recycled Kraft Paper Making Machine - Fluting&Testliner Paper Production Line Cylinder Mould Type – Dingchen

short description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our commission is to serve our buyers and purchasers with most effective good quality and aggressive portable digital goods for Small Waste Paper Recycling Machinery, Straw Pulp Making Machine, Paper Slitting Rewinding Machine, We will continually strive to improve our service and provide the best quality products with competitive prices. Any inquiry or comment is highly appreciated. Please contact us freely.
Factory wholesale Recycled Kraft Paper Making Machine - Fluting&Testliner Paper Production Line Cylinder Mould Type – Dingchen Detail:

1.Raw material  Old Carton,OCC
2.Output paper  Testliner paper,Kraftliner paper,Fluting paper,Kraft paper,Corrugated paper
3.Output paper weight  80-300 g/m2
4.Output paper width  1800-5100mm
5.Wire width  2300-5600 mm
6.Capacity  20-200 Tons Per Day
7. Working speed 50-180m/min
8. Design speed 80-210m/min
9.Rail gauge  2800-6200 mm
10.Drive way  Alternating current frequency conversion adjustable speed, sectional drive
11.Layout  Left or right hand machine

Old cartons →Stock preparation system→Cylinder mould part→Press part→Dryer group→Sizing press part→Re-dryer group→Calendering part →Reeling part→Slitting&Rewinding part

Requirements for Water, electricity, steam, compressed air and lubrication:

1.Fresh water and recycled use water condition:
Fresh water condition:clean,no color,low sand
Fresh water pressure used for boiler and cleaning system:3Mpa、2Mpa、0.4Mpa(3 kinds) PH value:6~8
Reuse water condition:
COD≦600 BOD≦240 SS≦80 ℃20-38 PH6-8

2. Power supply parameter
Voltage:380/220V±10%
Controlling system voltage:220/24V
Frequency:50HZ±2

3.Working steam pressure for dryer ≦0.5Mpa

4. Compressed air
● Air source pressure:0.6~0.7Mpa
● Working pressure:≤0.5Mpa
● Requirements: filtering、degreasing、dewatering、dry
Air supply temperature:≤35℃

(1)The seller will provide technical support and send engineers for installation, test run the whole paper production line and training the buyer’s workers
(2)As different paper production line with different capacity, it will take different time to install and test run the paper production line. As usual, for regular paper production line with 50-100t/d, it will take about 4-5months,but mainly depend on the local factory and workers’ cooperation situation.
(3)The buyer shall be responsible for the salary, visa, round trip tickets, train tickets, accommodation and quarantine charges for the engineers


Product detail pictures:

Factory wholesale Recycled Kraft Paper Making Machine - Fluting&Testliner Paper Production Line Cylinder Mould Type – Dingchen detail pictures

Factory wholesale Recycled Kraft Paper Making Machine - Fluting&Testliner Paper Production Line Cylinder Mould Type – Dingchen detail pictures

Factory wholesale Recycled Kraft Paper Making Machine - Fluting&Testliner Paper Production Line Cylinder Mould Type – Dingchen detail pictures

Factory wholesale Recycled Kraft Paper Making Machine - Fluting&Testliner Paper Production Line Cylinder Mould Type – Dingchen detail pictures


Related Product Guide:

Good quality To start with,and Purchaser Supreme is our guideline to offer the top service to our customers.Presently, we've been seeking our best to be amongst the top exporters inside our industry to fulfill consumers extra need to have for Factory wholesale Recycled Kraft Paper Making Machine - Fluting&Testliner Paper Production Line Cylinder Mould Type – Dingchen , The product will supply to all over the world, such as: Burundi, Uganda, Jordan, With the enterprising spirit of" high efficiency, convenience, practicality and innovation", and in line with such serving guidance of "good quality but better price, " and "global credit", we've been striving to cooperate with the automobile parts companies all over the world to make a win-win partnership.
  • The enterprise has a strong capital and competitive power, product is sufficient, reliable, so we have no worries on cooperating with them.
    5 Stars By Phoenix from Salt Lake City - 2018.09.23 18:44
    The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.
    5 Stars By Princess from Belarus - 2018.03.03 13:09